more about the Manrose Extractor fans, strong ventilation solutions via sparksdirect

You may have noticed that, though we’re not writing too much here on this blog, there’s much activity on the blog at sparksdirect.co.uk. The articles we post there are not as short as the ones you can find via the NewLights blog: they are quite comprehensive, worthy of study and reference. Let’s take the Manrose extractor fans for example -  recently there have been at least 3 articles posted online, with solid information inspired by what the manufacturer put out in the user manuals / website, like:

Problems caused by poor ventilation and their solution(Manrose extractor fans)

Being inspired by what Manrose advises regarding the siting of the fans and the problems created by the lack of ventilation, we have compiled some ideas and listed them below(the source can be found at the Manrose Fan Selection page). Read more in this article about: The problems that can appear due to poor ventilation; Help – solving the lack of ventilation in the homes; Locate/site your fan correctly in the home; Choosing the proper / perfect fan for the best ventilation.

Shower fan and bathroom extractor fan, the Showerlite range from Manrose

The Manrose Showerlite range of bathroom extractor fans is a distinctive Showerlite which is incorporated into a circular diffuser, suitable for showers and bathrooms. This range is available in the 100mm (4″), 120mm (5″) and 150mm (6″) versions. The Manrose Showerlite can be used within the splash area of the shower or bath and is powered by a S.E.L.V. remote safety isolating transformer. The Showerlite extractor fans is suitable for any 100mm (4″), 120mm (5″) and 150mm (6″) in-line system such as the Manrose SF/ID range of in-line axial fans or the CFD/MAN range of in-line centrifugal fans.

The Manrose Centrifugal Fans for domestic and commercial applications: powerful ventilation

The Manrose CF100, CF200 and CF400 centrifugal fans use the latest technology to provide extremely powerful, yet very quiet and vibration free ventilation – they are some of the best-seller Centrifugal Fans in the market! The Manrose CF100/200 ranges are especially designed for bathrooms, toilets, cloakrooms, utility rooms, and Manrose CF400 is designed mainly for kitchens and commercial applications, such as restaurants, hotels and offices. The Centrifugal Fans from Manrose are designed to move air over long distances; all these units will give a maximum performance even against pressures(caused by long lengths of ducting) and resistance(caused by the grilles). All the Manrose Centrifugal fan models are fitted with a built-in spring operated non-return flap into the discharge spigot to stop any backdraughts. Read more in this article online about the features of the Manrose Centrifugal Fans, the available models and ranges, notes about installation / electrical data, and some additional data(including the dimensions).

If you want to find out more about the Manrose fans, follow the Manrose Ventilation Fan / Manrose extractor fans tags on our website. To buy it online, visit the Manrose Extractor Fans and choose the one you need.

all you need to know about the Hager Invicta 3 Type B Distribution Boards

can be found via our website and our blog – recently we started a series of articles about this series, the Hager Invicta 3 Type B, Distribution Boards (industrial consumer units), where we describe them and list their features as specified by the manufacturer, Hager. Here’s what you can find out about them until now:

The Hager Type B Distribution Boards – the Invicta 3 range – meets the 17th Edition needs

This article is introducing the new Hager Type B Distribution Boards – meeting the needs of the 17th Edition – part of the Industrial Distribution Boards; the Invicta 3 range: decisions, features (like: The Ease of metering, The Simple cable entry, The Neutral bars, The Earth terminal cabling, The Simple extensions, The Tap off board extension, and The Clear Labeling), and benefits.

This new range of Type B boards from Hager makes it easier for you to design and install electrical distribution systems that meet the needs of today and the future. Read more…

At least 4 reasons for choosing the Invicta 3 Type B Distribution Boards from Hager

Why should one specify the Hager Invicta 3 Type B boards? Read more in this article about some of the benefits brought by the Invicta 3 range, and then at least 4 reasons for which the Hager Invicta 3 Distribution Boards should be used where the need is(The Trunking Cable Entry, The Earth and Neutral Bars, The Metering, and The Glazed Door). Read more…

The new features and design of the Invicta 3 range of Type B Distribution Boards from Hager

The Invicta 3 range of Type B boards from Hager has been manufactured and designed to meet with the new IEE Wiring Regulations. Have a sneak preview in this article – see all of the new features that Hager has designed in and how this is going to make installing a distribution board so much easier(this guide is also online via Hager).

If you want to read more about these guides, you can find them online via Hager – Invicta 3 Distribution Boards Hager. On the other hand, if you want to purchase this range of Type B Distribution Boards(the Hager Invicta 3), visit our website – Industrial Consumer Units.

Illuma tracklights, track spotlights, track fittings, the ranges

We have started introducing a series of track spotlights from Illuma, which can be followed by the tags Illuma Track Lights and Track Systems. Here are some of the more important ranges, all of them available via the Track Lights – Illuma Track Spotlights.

The Illuma Rocket Track Lights

The Rocket range of Track Lights from Illuma is an essential range of compact spotlights for mains operated PAR halogen reflector lamps. They are specifically designed for universal applications. Available with the normal lamp version and with the cone lamps, this series of Spotlights is for the 1-circuit track. As to the usage, the Illuma Rocket is ideal for highlighting and general lighting in retail, commercial and domestic applications, particularly where unobtrusive miniature fittings are required. Read more in this article about the general features of this range of Illuma Rocket Track Lights, some technical data, the materials used for its construction, and the available models (T325WH, T326WH, T327WH and T328WH)- buy online the Illuma Rocket Spotlights via Sparksdirect – the best price online!

Illuma Electrostar, Lightweight Track Spotlights

Part of the Illuma Track Lights, the 1-circuit track lighting systems, the Illuma Electrostar range is a series of compact, lightweight spotlights for mains track or surface mounting. They are ideal for both highlighting and general lighting in retail, commercial and leisure environments. Read more in this article online about the Illuma Electrostar’s features, the lamp data & the materials used for this series of spotlights.

Illuma Lumapar, Discreet Track Spotlights

The Illuma Lumapar range of track spotlights belongs to a flexible range of discreet spotlights for mains tungsten halogen lamps not requiring a transformer. They are ideal for highlighting and general lighting in retail, commercial and domestic applications, particularly where unobtrusive miniature fittings are required. The Illuma Lumapar range has twelve styles in white, black or silver-grey (all) or chrome finish (TM3210/S, TM3220/S, TM3410/S and TM3420/S only); the standard track versions are for use with Illuma 1-circuit track; all can be also used as surface-mounting versions. Read more in this article online about some of the features of the Lumapar range, the lamp details, technical data, and the materials used for this range.

Illuma Electrospot, Highlighting Track lights

The Illuma ElectroSpot range of track lights has a timeless design for use on mains track or surface mounting. This range is ideal for both highlighting and general lighting. The quality of lighting is given also by the new illumaled lamp technology.

Read more in this article online about the features of the Electrospot range, the ease of installation, the lamp description, some technical data, the materials used, and the Illuma Electrospot versions available.

Illuma Topspot, Surface or Track Light

One of the most popular track light fitting range from Illuma, the Illuma Topspot T310 / T410 is a simple yet versatile range of spotlights for mounting on a 1-circuit track, accepting reflector, PAR and GLS lamps. The Topspot T310 range is a track mounted spotlight, and the Topspot T410 is a surface mounted spotlight – whether you need the spot light to be surface or track mounted, we have the right solution for you! Read more in this article online about the Topspot features, details about the installation, lamp features, some technical data, and the materials used.

Illuma Concepta Robust diecast tracklights

One of the most popular and much appreciated ranges from Illuma, the Illuma Concepta range of track lights, is a robust, diecast aluminium range of spotlights, with fully adjustable body and head. These track light fittings are ideal for accent lighting in retail, commercial and leisure environments. This article introduces the Illuma Concepta range(especially the Concepta TH3111X series) – Find out more about the technical specs of this track light fitting, details about the 2 series in this range, and more about the Concepta TH3111X – features, installation, lamp description, the materials used, and some technical data.

Lutron Breakfast at Sparks and Lights showroom, new: Lutron Grafik GRX-QS

We would like to thank all our customers that visited us yesterday morning, when the sales team from Lutron was here in our Sparks & Lights showroom(Archway, North London), for the Lutron Breakfast Morning. Some of you have seen the showcase from Lutron, with all their dimming system simulations, introducing the new systems and also speaking about the older/best selling models. Below you can find some pictures that are more representative of the event(don’t worry, we have tried not to post pictures of our customers necessarily, but mainly of the equipment and the showcase).

Welcome to the Lutron Breakfast Morning – this is part of the gear that the Lutron Sales Team brought to show us the new models(the Lutron GRX-QS series).

Lutron dimming systems showcase – these are some of the many devices that compose the Lutron Grafik 3000 system, ideal for total home dimming systems.

One of the Lutron’s representatives explaining the new Grafik system – the Lutron GRX-QS – to some of the visitors and customers. QS – total lighting control.

A closer look at the Lutron GRX-QS system, customisable preset light and blind control system, the new Grafik dimming system from Lutron(the full system includes more devices, like the remote control, the wall-mounted dimmers, the control panel, etc) – fully customisable, 16 zones!

The Lutron GRX-QS Control Panel, incorporated with the new Lutron QS technology(intuitive control of both electric light and daylight) – precision control of daylight and also energy saving!

We don’t have it yet on our website – the Lutron GRX-QS system – because Lutron just put this series out, but it will soon be online both on our blog and on our website – Lutron Grafik Systems.

Illuma Lights rocks – high quality IP rated Downlights and Wall Lights, good reviews!

We have started for a while now to go through the many ranges of Track Lights, Spotlights, Ceiling Lights, Wall Lights, etc – manufactured by Illuma, on our main blog – reviewing Illuma Lights. Here are the main ranges of wall lights and ceiling lights we covered so far:

Illuma Lumaseal – IP65 semi-flush wall/ceiling light

The Illuma Lumaseal range is a tough contender for numerous general and ambient lighting solutions. Its IP65 rated construction makes it suitable for interior wet environments as well as exterior usage. The Lumaseal range is represented on our site by DL3TD428 – Illuma Lumaseal IP65 semi-recessed light 28W – but if you require any other models, please let us know. Read more + view applications of the Lumaseal range of Lights.

Illuma Project 95 – Interior Classic Downlights

These nice small downlights from Illuma, the Project 95 range, are a series of classic, shallow-depth downlights. Ideal for both highlighting and general lighting in retail, commercial and general interior applications. Particularly, they are suitable where the ceiling void is shallow. Flexible recessed lights – the direction of the light can be modified as needed. Read more about the Illuma Project 95 range(including dimensions, applications, the full range, etc).

Illuma Proseal IP65 Die-Cast Downlights

Usage: This Illuma Proseal IP65 ceiling light is ideal for damp and humid environments, such as kitchens, bathrooms, showers and exterior soffits. The front glass pulls down easily for a quick lamp change. This range of downlights are either with a clear or with a frosted glass. Read more on our blog about some of the features of this downlight, the lamp features, some technical data, and the materials used for the Illuma Proseal IP rated downlight – see available models.

Read more about these ranges, and also about the other Illuma manufactured light fittings(like the spotlights and the tracklights) via our blog – Lights Reviews Online.

LUXOMAT energy saving single channel occupancy detector – surface or flush fitting

We have joined all the other voices online crying out for the more frequent use of more energy-saving solutions by introducing the PIR-presence detectors, the Time Lag switches, the B.E.G. Luxomat Detectors intro, some PIR detectors and info, the Illuma advice for energy saving, essential steps for saving the energy, google knol on energy saving, etc. To continue the introducing of the B.E.G Luxomat range of Occupancy Detectors, today we have the Luxomat PD3 series – single channel flush or surface mounted occupancy detectors. This range of detectors provides simple, localised control of the lighting or HVAC system, by automatically turning the load on when needed for indoor ceiling applications, with 360° coverage. The detector LUXOMAT® PD3-1C-SM is available in a e version with integrated acoustic sensor (micro version), can also cover persons who otherwise by the infrared radiation of the detector would not be recognized (e.g. in corners or behind walls)! Typical applications of the series of PD3 Luxomat Occupancy Detectors: monitoring of smaller areas like stairwells, private garages, galleries, wash rooms. Read more about the features and the technical data about this range.

Luxomat PD3 Occupancy Detector features

• Switches all types of light fixtures.
• Switches 2000W of incandescent or 1000W fluorescent load.
• 10m detection zone (5m seated, 6m walking towards and 10m walking across).
• 15 seconds to 30 minutes adjustable time delay.
• Models available: Surface mounted(SM) and Flush(FC) fittings.
• With or without acoustic sensor (micro).
• IP rating: SM is IP54, FC is IP20.
• 10 – 2000 Lux adjustable photocell.
• Manual controllable occupancy detector for inside use LUXOMAT® PD3-1C-SM/-FC/-FM PD3-1C-SM/-FC Micro for surface, false ceiling and flush mounting with circular detection area.
• One channel to switch the lighting.
• Switching for all types of light fixtures by high performance relay.
• Optical system, designed for highest sensitivity.
• Serial impulse function (gong).
• Sensitivity adjustment.
• SM fits onto conduit box.
• Buy the Luxomat PD3SM or Luxomat PD3FC via SparksDirect.

PD3 Occupancy Detectors – Technical Data

• Adjustments manual by potentiometer;
• Power supply: 230V~ +6%/-10%;
• Detection area: circular, 360°;
• Range in m (e.g.): Ø radius;
• Seated: 5.00 2.50;
• Walking across: 10.00 5.00;
• Walking towards: 6.00 3.00;
• Mounting height: 2 – 3m;
• Power consumption: < 1W;
• Light measuring: mixed light – artificial and daylight to control the light;
• Channel 1 (Control the lighting);
• Switching power: 2000W, 1000W; dry contact type: NO;
• Time settings: impulse or 30sec – 30min.;
• Light sensor: 10 – 2000Lux;
• Protection: SM IP54, FC and FM IP20, FC with accessory (92206) also IP23 / Class II / CE;
• Dimensions:
  - SM Ø 106 x H 52mm;
  - FC Ø 80 x H 84.5mm;
  - FM Ø 98 x H 65mm;
• Housing UV- and shock-resistant Polycarbonate;
• Ambient temperature: -25°C to +50°C.

To purchase the Flush Occupancy Presence detector Luxomat PD3FC or the Surface Mounted Occupancy Presence detector Luxomat PD3SM, visit the Occupancy Detectors&Switches category on our website.

energy saving solutions – save more than money with PIR presence detectors

To continue the same train of thought as we were having while introducing the Time Lag Switches(which are a good solution for the saving of the energy consumption) and the general intro for the PIR motion detectors, today we want to talk about a specific model – the SLFM360 from Timeguard – principles of functioning, where to locate it, and other features.

360º Flush Mount Ceiling PIR Light Controller – Features

• The SLFM360 utilises passive infrared technology to detect heat radiation of moving human bodies.
• Upon detection, the attached lighting load will illuminate for a user-determined time period.
• An integral daylight sensor ensures all day or night-only operation.
• Light Pollution and Considerate Lighting: Please be aware of the annoyance over-lighting an area can cause to your immediate neighbours.
• Light pollution caused by incorrectly installing a unit or over-lighting an area can be limited by carefully considering the location and position of your unit before installation.
• The light spread on all halogen floodlights can be reduced by angling the floodlight downwards on the mounting bracket.
• This will also concentrate the light on your property and limit the potential inconvenience of the light shining into your neighbours windows etc.
• Please see Selecting a Location for information on choosing the optimum location for any security light controlled by this unit.
• This product is suitable for indoor use only.
• Connected load must not exceed maximum 2000W filament/incandescent or 500W fluorescent/low energy lighting.
• Do not attempt to install if you are suffering from nausea or dizzy spells or on medication with similar side effects.
• If in any doubt, consult a qualified electrician.
• Not suitable for use with discharge lighting.

Parts included in the SLFM360 PIR presence detector

• PIR Sensor unit.
• Instruction manual. Please keep safe for future reference.
• Accessory Pack. Includes wiring cover, 2 x cable clamps, 4 x clamp screws and 1 x lens mask sticker.

Tools and parts you need for installation

• 3 core flexible cable.
• Electric/hand-held drill & bits.
• 75mm or 3 inch diameter hole cutter.
• Terminal or Electricians screwdriver.
• Small Philips screwdriver.
• Wire cutters.
• Suitable mains interconnect cable.

Selecting a location for the PIR presence detector

• The motion detector has a number of detection zones, at various vertical and horizontal angles as shown.
• A moving human body needs to cross/enter one of these zones to activate the sensor.
• The best all-round coverage is achieved with the unit mounted at the optimum height of 2.5m.
• Careful positioning of the sensor will be required to ensure optimum performance.
• The sensor is more sensitive to movement ACROSS its field of vision than to movement directly TOWARDS. Therefore position the unit so that the sensor looks ACROSS the likely approach path.
• Avoid positioning the sensor where there are any sources of heat in the detection area (extractor fans, tumble dryer exhausts etc.) including opposite any other light sources such as other security lights.
• Reflective surfaces (ie pools of water or white-painted walls) and overhanging branches may cause false activation under extreme conditions.
• During extreme weather conditions the motion sensor may exhibit unusual behaviour.
• This does not indicate a fault with the sensor.
• Once normal weather conditions return, the sensor will resume normal operation.

This SLFM360 is part of SparksDirect’s offer of Energy Management solutions – see the full offer on our website, or download the pdf catalogue.

Energy Saving solutions – use Time Lag Switches for reducing the energy consumption

There is a quick and effective way to reduce the energy consumption for the lighting applications – use time lag switches(time delay switches)! The way these wiring accessories work is – by pressing the button/the pad, the lights turns on and, after a set interval of time, the light turns off! The range of time lag switches found at sparksdirect.co.uk do not require a neutral connection – they can simply replace the existing light switch; also, in most cases they represent a simpler/cheaper/more effective solution for lighting control.

Where can you use a time lag switch? The Time Delay Switches are ideal for the lighting applications on the stairwells(staircases), in the meeting rooms, on the corridors, in the entrance lobbies, the store cupboards, at the toilets, etc. They are fully suitable for new or retro-fit applications.

General Key Features and Benefits of the Time Lag Switches

• The time lag switches do not require a neutral connection(easy replacement of the existing light switches).
• The time lag switches are multi-way – all models can be act as 1 way, 2 way or intermediate switches.
• High rating – they switch flourescent and incandescent loads(see their particular specs).
• Tamperproof switches: the lights turn off even if the button is wedged down.
• Optional: weatherproof – for placing outdoors, outdoor lighting control.
• The Time interval – up to 20minutes, ensuring user safety(can be manually adjusted).
• Unless otherwise specified, these time delay switches take 10A of lighting including incandescent, fluorescent, compact fluorescent, low voltage (switch primary of transformer).

Some more specific models of such Electronic Time Delay Switches

The Push Button Electronic Time Lag Switches, the Ellipse range

• Push button activated, with a large ellipse button;
• Interval: 10sec – 20mins; can be used in 1/2ways and intermediate;
• Load rating at 230VAC – both at Incandescent, Fluorescent and Compact flourescent – 10A;
• Buy this Ellipse Time Lag Switch online.

The Push Button Electronic Time Lag Switches, the KH1 range

• The duration is set by the thumbwheel on the reverse of the unit, 20sec – 20mins, 10A;
• Comes with extra terminals to allow slave switches to be connected to the system to trigger the timer. The KH1N version has an illuminated push button to allow the unit to be located in the dark.
• Buy online this Round Button Time Delay Switch.

The Touch Activated Electronic Time Lag Switches, the KH2 range

• Available also in Weatherproof versions(KH3);10secs – 20mins;
• can be used as intermediate and 1/2 ways; activated by touching the pad;
• this is a time delay switch touch activated, with the option of having a neon;
• Buy this touch activated time lag switch online.

The MK Time Lag Switch with Rocker Switch

• Loads taken: 60W – 400W;
• Adjustable time delay 2-15minutes;
• Not suitable with fluorescent lamps, 2D or energy saving lamps/low voltage systems;
• Purchase online this MK made Time Lag Switch.

Cool Ice fixed downlight, Luga wall light and Nola shaded light for walls – sparks and lights

I don’t know if you can keep up with reading about the lights we introduce daily on our blog, so then here we are just reminding all our visitors about these light – both ceiling and wall lights. Today we would like to introduce the Cool Ice Round/Square fixed downlight, the Luga wall lamp and the Nola Wall Light with black/white shade.

The Ice Square / Round Cool Downlight – IP rated

Part of the IP rated lights, the Ceiling Lights, the bathroom lights,  the low voltage lights and the popular bathroom lights, the Ice shower downlight range – Round or Square Recessed Light for bathrooms – with fireproof properties – is ideal for a contemporary home. This clear glass fitting with IP65 rating can be used anywhere in the house(including in areas where there is splashing water). This light fitting is a low voltage bathroom ceiling light – uses a 50vA 12V transformer(not included). Read more about the features of the Ice Shower Downlight range, view the schematic representation of their dimensions, and also their positioning in the ceiling – on our blog.

Luga Bathroom Wall Light – Polished Chrome with White Diffuser

Part of the IP rated lights, the Polished Chrome fittings, the popular bathroom lights/popular wall lights, The Luga Polished Chrome Bathroom Wall Light (IP44) is one light wall sconce with opal glass diffuser and polished chrome base, with integral pull cord switch. Ideal for wall mounting especially in the bathrooms, this switched wall lamp can also be placed in the bedroom, the dining room, the living room, etc(outside of the reach of splashing water). The Luga Range of wall lights for bathrooms is part of the stunning range of Chrome and Glass wall lights, with a modern design and a cone shape. The Luga Wall Light with white opaque glass diffuser and a fitted cord switch also uses a mains voltage halogen light bulb(which is included). Read more on our blog about the features of this bathroom wall light and its dimensions.

Nola Wall Lamp – with White/Black Fabric Shade

Part of the wall lamps/wall lights, even the IP20 wall lamps, this best seller wall light – the Nola Wall Lamp with metal base and fabric shade – is a small size Nola Nickel or Nola Bronze Wall Light, with a fabric shade, ideal for downlighting contemporary homes. This is a modern wall light in polished nickel and black shade or Bronze finish and white shade – pleated shade. This range is part of the interior lights for wall mounting, with nice metal plate as a base and a downlighter with fabric shade.

Read more on our blog about the features of the Nola range of wall lights, and view the dimensions.

In the section of Article about Lights, you will find the full list of articles that introduce the best lights – the most popular lights – on sparksdirect.co.uk. Thank you for notifying us – and keep reminding us – about these lights: what else would you like to know about the Lights on our website? Which light should be with more information? Drop us a line or let us know…

The GET wiring devices – SparksDirect introduces the GET Ultimate & GET Smart

In a series of articles on our other weblog, we have recently introduced some of the GET ranges of switches and sockets, especially:

The GET Smart wireless dimmers, controlling wirelessly the connected lights

The GET Smart Wireless Lighting System operates by sending coded wireless signals from controllers to wired-in circuit receiver units. These receiver units in turn control any light fittings that are connected to them. The stylish battery operated controllers can be located in any position around the home. They are available either as a wall controller that can be mounted as a flush switch in the existing 16mm deep wall box, as a surface switch in the supplied surface pattress box or as a remote portable unit. Continue to read about the GET Wireless range features and existing models.

GET Ultimate white moulded wiring accessories – switches and sockets

The GET Ultimate White Moulded wiring accessories offer a stylish, modern alternative to traditional white moulded products. Aesthetically pleasing and ultra-slim(see a review of the Ultra-Slim Ultimate Moulded range), these sleek fittings with their subtle curved profile and minimal back projections have been carefully designed to ensure ease of installation. The GET Ultimate moulded has been extended with the introduction of slim profile outboard rocker switched sockets and wide rocker switches that comply with Part M and also the Disability and Discrimination Act. The range, which includes Euromodular and grid variants, was designed to complement the Ultimate Flat Plate ranges for situations where a combination of fittings may be required. Read more about the features and benefits of this range, including a comprehensive list of the available models from GET Ultimate White Moulded Range.

GET Ultimate screwless flat plate, metal flat plate switches and sockets

The GET Ultimate Screwless Flat Plate range is designed for easy installation the Ultimate range provides one of the most comprehensive ranges of beautifully crafted, sleek, sophisticated fittings on the market. The GET switches and sockets manufacturer has now taken this minimal design approach one step further, thus creating the GET Ultimate Range, especially the ScrewLess Flat Plate – meta plate. The stunning result is the Ultimate Screwless Flat Plate range. More choice, more style, and packed with innovative technical features for easy installation. Never has less meant more! Continue to read in this article about the features of the GET Ultimate Screwless Flat Plate, the existing finishes, and the available models.

GET Ultimate Flat Plate Wiring Accessories, GET Ultimate switches and sockets

The GET Ultimate flat plate – The ultra-slim Ultimate Flat Plate range and grid system is all about superior engineering and sleek, sophisticated style. This beautifully crafted, easy to install range adds that special finishing touch to any interior – whether domestic or commercial. Available in a choice of six high quality plate finishes with black or white interior/insert options, coordinating these accessories with other GET fittings has never been easier.  Read more about the features and benefits of the GET Ultimate Flat Plate range and the available finishes in this range.

For more info about the GET range of wiring accessories, consult also – GET, the Ultimate range of wiring accessories and grid system, GET Fit and GET Adaptable, GET Style and GET Quality, the GET Ultimate switches and sockets; The GET Ultimate range of wiring accessories, switches and sockets; GET Ultimate Ultra-Slim moulded, Flat & screwless plates, Ultimate Grid, via the Switches and Sockets articles page.